Leave a reply

4 comments
  • Plug your extender near to your router.
    Now use an ethernet cable and connect your extender to PC.
    If you have WiFi on pc, please turn it off.
    Open your browser.
    Type in the address bar- setup.ampedwireless.com or 192.168.1.240.
    Setup page will appear.
    Follow the instructions for setup.



    0



  • 1.CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER AND YOU WILL SEE LIGHTS STARTS BLINKING ON YOUR EXTENDER.
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK ONCE THE LIGHT WILL BE SOLID.
    5.NOW ENTER THE ADDRESS FOR YOUR EXTENDER SET UP.
    6.LOGIN WITH DEFAULT CREDENTIALS THERE.
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)



    0



  • To setup your amped extender kindly follow these steps:-
    1.Plug your Range Extender into a power outlet near your main Router.
    2.Push the WPS button on your main Router first, then immediately push the WPS button on your Range Extender.
    3. After you have pushed WPS button of your Router, you need to push WPS button of your Range Extender within 2 minutes. .
    4.After pushing the WPS button of your Router, your Router WPS LED should blink. If your Router WPS LED doesn’t blink, it means you need to push the WPS button again until the WPS LED of your Router blinks. The same reason is also suitable for RE product. After pushing the WPS button of your Range Extender, the WPS light of your Range Extender should blink. If not, push again.
    5.The WPS process will last 2 minutes. You can wait 2 minutes, and then check the wireless signal LED of your Range Extender.
    5. After 2 minutes, if the wireless signal LED of your Range Extender is still off, it means the WPS process fails. You may need to try one more or several more times of WPS operation, and repeat the steps above.
    6. At last, you can put your Range Extender in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network. No need to repeat the process. Once it’s done, it will connect automatically every time you plug it back in.
    For any help feel free to call us back on 1-800-603-4024.



    0



  • In order to setup a range extender follow the below given steps:
    > Plug in the router to a wall outlet directly
    > Connect your computer to the wifi of your extender to the default SSID or the network name
    > Pull up a browser and at the top type in 192.168.1.240
    > you will see a scan button click on that
    > look for your existing network select that eneter the password
    > click on next it will take at least 2 -3 minutes to complete the setup once itts done it will ask you to connect your devices to the extended network.
    > Setup is Complete



    0



Written by hampton edwards
Router Categories