Leave a reply

3 comments
  • You can follow the instructions below.
    – 1.Plug in your TP-LINK AC2300 into a wall outlet.
    – 2.Now you wait for the Power light to be solid.
    – 3.Now you have to connect an Ethernet cable from the internet modem to your tplink router.
    – 4.Once the cable connections are done, open your internet browser and type 192.168.1.1 or tplinkwifi.net
    – 5.Now follow the instructions given on the screen and your router will be setup.



    0



  • Connect your computer to Tplink router using ethernet cable from router’s LAN port to PC ethernet port.
    Now open your browser.
    In the address bar type 192.168.0.1 and enter.
    The login page will appear.
    Use admin to access the dashboard and make sure you write each information while setup.



    0



  • To setup your router you need to follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. that will open a setup wizard for you so follow the steps and you are good to go.
    7. while following the setup wizard kindly make sure the settings you are choosing is correct
    i.e time zone and wireless network name and key.
    8. kindly upgrade the router firmware as well if there is any update pending over there.
    if problem still persists you can reset your router and follow the same steps.
    For any help feel free to call us back on 1-800-603-4024.



    0



Written by JamesJudy
Router Categories