Leave a reply

2 comments
  • To setup an ORBi you need to make sure the Orbi Router and all the satellites are together till the setup is complete after you can place the satellites to there respective places.
    1> connect a Ethernet Cable from the modem LAN port to the ORBI router internet port. turn on the Orbi system and then turn on the satellites wait until the lights on the satellites turn solid blue from flickering white.
    2> Connect the computer wireless or via ethernet cable to the ORbi router on the default ip with default password.
    3> Pull up a browser and login to http://www.orbilogin.com/net or else you can login with default IP 10.0.0.1 the username is admin and the password is password.
    3> Initiate the setup process and and make sure during the setup if the lights on the satellites goes to White or Magenta it means something went wrong after completing the setup put the satellites back to there respective places connect the devices to the wireless and its done.



    0



  • To setup your orbi system kindly follow these steps:-
    1.Unplug your modem and remove and replace the backup battery if it uses one.
    2.Plug the modem back in.
    3.Connect your modem to the yellow Internet port on your Orbi router using the included Ethernet cable.
    4.Connect your Orbi router to a power source.
    5.Wait for the Orbi router’s ring LED to light solid white and then pulse white.
    6.Place the Orbi satellite in the middle of your house to get the best WiFi coverage.
    7.Connect the Orbi satellite to a power source.
    8.Wait for the Orbi satellite’s ring LED to light solid white, then pulse white, and then pulse magenta.
    9.After the Orbi satellite’s ring LED pulses magenta, it lights one of the following colors for 10 seconds then turns off:
    Solid blue. The connection between the Orbi router and Orbi satellite is good.
    Solid magenta. The Orbi satellite cannot connect to the Orbi router. Move the Orbi satellite closer to the Orbi router.
    Solid amber. The connection between the Orbi router and Orbi satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.
    If the Orbi satellite successfully syncs with the Orbi router, the Orbi satellite’s ring LED pulses white, then lights solid blue to indicate a good connection, and then turns off.
    10.Connect your computer or mobile device to the Orbi router or satellite with an Ethernet or WiFi connection.
    11.Visit http://orbilogin.com and follow the on-screen instructions to set up your Orbi network.
    The Orbi router’s ring LED turns off after the setup is successfully complete.
    For any help feel free to call us back on 1-800-603-4024.



    0



Written by Normand1953
Router Categories