Leave a reply

  • To setup your TP-link re450 as an access point kindly follow these steps:-
    1.Login to the main page of the range extender
    2.Click Mode in the top right corner of the page. Select Access Point and click Save. The extender will reboot and switch to Access Point mode.
    3.After rebooting, connect the extender to your modem or wired router via an Ethernet cable.
    4.Visit http://tplinkrepeater.net, and log in with the username and password you set for the extender.
    5.Go to Quick Setup to configure your extender.
    6. From here kindly manage the settings as per your choice.
    For any help feel free to call us back on 1-800-603-4024.


  • Log int extender dashboard
    Click the Mode button on the upper-right corner, select Access Point and click Save.
    Extender will reboot to make your changes take effect, and please do NOT operate during the process.
    Click Quick Setup on the top panel, then follow the step-by-step instructions of the Quick Setup to complete the configuration.
    Connect the wired router’s LAN port to the Ethernet port on your extender via an Ethernet cable.

    For more assistance call us at 1-800603-4024.


Written by John Kuypers
Router Categories