Leave a reply

2 comments
  • The Reset button is used in rare cases when the Range Extender may function improperly. Resetting the Range Extender will restore the Range Extender’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button.
    Push and release the “Reset” button. The light on the Range Extender will momentarily flash and then become solid again, indicating that the reset is complete.
    For more assistance call us at 1-800-603-4024



    0



  • As you have mentioned that your belkin extender is not working properly as its dropping the signals kindly follow these steps:-
    1.Reboot the extender.
    2.Reboot the router.
    3.Update the firmware of your router.
    4. check the distance between router and extender it should be in range.
    5. extender should be properly configured.
    6. check the channel and frequency settings of your router and extender.
    if problem still persists kindly reset your extender and re setup the device.
    for any help feel free to call us on 1-800-603-4024.



    0



Written by Stjannifer
Router Categories