Leave a reply

3 comments
  • 1.First of all reset the extender by pressing reset button while its powered on.
    2.And then connect the extender by pressing wps button on extender and router.
    3.Once its connected to the network go to the browser and enter setup.ampedwireless.com
    or you can use 192.168.1.240 (241 for SR150) .
    4.Now you have to login on to the account of your extender so you can make the changes once
    you will get the access.
    5.If still you face any kind of trouble doing it you can contact on 1-800-603-4024.



    0



  • Try to reset it. Unplugged every wire. Reconnect it wait 1-2 min then Supply the power. Setup it again.



    0



  • As you have mentioned that you are not able to setup your amped range extender kindly Locate the red circle on the back of the unit. Use a pen or paper clip to press the button and hold for 8-10 seconds and then release. You will know you reset the unit if the WPS light comes on and signals the reboot process has started. If you do not see the WP light come on, please try again. If you do not get the WPS light after trying this a few times, unplug the device and let it sit for at least 45 seconds.
    After this step you need to re setup your unit.
    For re setup kindly follow these steps:-
    1. connect your extender in a direct wall socket near by your router for setup.
    2. press wps button on your extender for 3-5 seconds.
    3. press wps button on your router (you can do it by accessing router main page also).
    4. it will be connected to your routers network.
    5. you will see your network name with ext affixed in it.
    6. connect to the same network .
    7. it will open a setup wizard for you.
    8. follow the on screen instructions and you are good to go now.
    for any question & query feel free to call us on 1-800-603-4024



    0



Written by James Smith
Router Categories