Leave a reply

3 comments
  • If you forgot the password simply reset your router with the help of paper clip by holding reset button for atleast 20-30 seconds and re setup the device.
    To setup your Linksys EA 7300 router you need to follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .now it will be (username-admin, password-password)
    6. that will open a setup wizard for you so follow the steps while following the steps it will ask you
    to change admin credentials so set that as per your choice.
    7. while following the setup wizard kindly make sure the settings you are choosing is correct
    i.e time zone and wireless network name and key.
    8. kindly upgrade the router firmware as well if there is any update pending over there.
    For any help feel free to call us back on 1-800-603-4024.

  • You need to reset the router to restore the router settings to its factory default.
    Use a paper clip and press and hold down the reset button for ten seconds , power light will start blinking now you can remove the clip, wait your router will reboot once power light turn solid you can configure the router settings again.

    For more assistance cal us at 1-800-603-4024

  • 1. Reset your router to factory defaults by using the paper clip for 30 seconds
    2. Configure the router settings again
    3. Choose the username and password of your choice once you are logged in into the dashboard by putting the default username and password
    4. Save the settings

Written by lynne
Router Categories