Leave a reply

2 comments
  • To Resolve your connectivity issues Kindly folllow these steps:-
    1.Reboot the cable modem.
    2.Reboot the linksys router.
    3.Update the firmware of your router.
    4.Verify if signal is strong through the cable modem.
    5.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
    6.Change the ‘Channel’ for 2.4Ghz from Auto to Channel 1 within the router admin (Advanced Settings > Wireless > Wireless Setup)
    7.Clone the ‘MAC Address’ by clicking on the “Clone Your Computer’s MAC Address” button within the router admin (Advanced Settings > WAN > Internet Setup).
    at last you can try this step:-
    8.Go to Advanced Settings > LAN > Host and LAN Settings Change “Enable DNS Proxy” to Off Save.
    your issue will be fixed with these steps if not just reset the router and re configure it.
    for any help feel free to call us on 1-800-603-4024.



    0



  • 1. Restart your router for good healthy amount of time to remove network glitches
    2. Check for the security key type and channel selected in the router page
    3. Check for firmware update
    4. Make sure you keep your router away from electronic devices to network signal interruption
    5. If these steps doesn’t resolve the issue reset your device and configure it again that will certainly help you making things run better and fast



    0



Written by Robert Fulton
Router Categories