0
EDWARD DRY
linksys router model no is wrt 1900ac
0 Subscribers
Submit Answer
0 Answers
1. Go to the printer panel and select wireless.
2. Under wireless there is an option to factory reset network settings
3. Select factory reset network settings
4. Once done restart the printer
5. Go to wireless again and select the wifi network SSID and enter the password
6. Once connected print the network status page will show you the IP address of the printer
7. Run the printer setup on the computer and choose wireless setup
8. Printer will be installed over the network and you are good to go
As you have changed wireless password of your network you need to again configure your printer on your network with new password.To reconfigure your printer kindly follow these steps:-
1. on your printer panel you need to press wi fi button then you will see a blinking
light over there.
2. then you need to go for wireless settings under settings you need to look for
wireless setup wizard.
3. your printer will search for available networks.
4. select your network name and give the right password to it.
5. click on connect it will be connected then you can print test wireless settings
page .
6. then you need to download software for your printer from official hp website.
7. after downloading just follow the setup wizard and you are good to go now.
(you can also connect your printer by wps method)
for any help feel free to call us back on 1-800-603-4024.