Leave a reply

3 comments
  • Find the circular button marked “Reset” on the back of your router.
    Use a pin or paperclip and press the “Reset” button.
    Hold the “Reset” button down for 10 seconds.
    Release the button.
    Wait for one minute for your range extender to fully Reboot and restore the factory setting.
    Plug Your Range Extender To Power And Restart Your Computer.
    Once Both Devices Are rebooted You Can See a Network By The Name Of Belkin.setup Please Connect With it.
    Now Open Your Browser And It Will Automatically Take yours to Belkin Extender Setup Page.
    Follow The Instruction And Select Your Wireless Network Name And Type The Password And Hit Next.
    Once Your Extender Is Configured You Can Place It Anywhere In Your House and Get Your Extended Network All Over Your Home.



    0



  • 1. Try resetting the device
    2. Once done it will take all the settings to default value.
    3. Try configuring it again and choose the password of your choice.
    4. Make sure you make a note of the credentials for future use.



    0



  • If you forgot the password simply reset your extender with the help of paper clip by holding reset button for at least 20-30 seconds and re setup the device.To re configure the device kindly follow these steps:-
    1. connect your extender in a direct wall socket near by your router for setup.
    2. press wps button on your extender for 3-5 seconds.
    3. press wps button on your router (you can do it by accessing router main page also).
    4. it will be connected to your routers network.
    5. you will see your network name with ext affixed in it.
    6. connect to the same network .
    7. it will open a setup wizard for you.
    8. follow the on screen instructions and you are good to go now.
    for any question & query feel free to call us on 1-800-603-4024



    0



Written by Gregory
Router Categories