Leave a reply

2 comments
  • 1. Perform power cycle and then check the status
    2. Check the status on other devices connected to the same internet connection
    3. If this doesn’t solve the problem then try resetting your device and configure it again which will solve the issue, also don’t forget to check the firmware update

  • To Resolve this issue kindly follow these steps:-
    1.Reboot the cable modem.
    2.Reboot the lnksys router.
    3.Update the firmware of your router.
    4.Verify if signal is strong through the cable modem.
    5.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
    6.Change the ‘Channel’ for 2.4Ghz from Auto to Channel 1 within the router admin (Advanced Settings > Wireless > Wireless Setup)
    7.Clone the ‘MAC Address’ by clicking on the “Clone Your Computer’s MAC Address” button within the router admin (Advanced Settings > WAN > Internet Setup).
    at last you can try this step:-
    8.Go to Advanced Settings > LAN > Host and LAN Settings Change “Enable DNS Proxy” to Off Save.
    your issue will be fixed with these steps if not just reset the router and re configure it.
    for any help feel free to call us on 1-800-603-4024

Written by Saundra Smothers
Router Categories