Leave a reply

3 comments
  • Follow these steps to setup your range extender again-

    -Reset the extender by pressing the WPS button for 20 seconds.
    -Wait for 2 minutes then connect your device on its open network.
    -Once connected, scan the QR code to land on the setup page.
    -You can also login using default IP or web address -192.168.10.1 / http://cflogin.com
    -Choose repeater mode and follow the instruction to complete the setup.

  • 1. Reset your extender
    2. Once reset it’s open to connect to any device, but we need to configure it first
    3. Login into 192.168.10.1 and configure the settings and you are good to go

  • If you have changed your Isp in this case you need to reset your wicommfii cf wr75o ac extender and reconfigure it again.
    You just need to press and hold the reset button for 20 seconds and then your extender will be reseted but kindly press reset button while its plugged in to a wall socket.
    To reconfigure your extender kindly follow these steps;-
    There are several ways to connect your extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
    1. connect your extender in a direct wall socket near by your router for setup.
    2. press wps button on your extender for 3-5 seconds.
    3. press wps button on your router (you can do it by accessing router main page also).
    4. it will be connected to your routers network.
    5. you will see your network name with ext affixed in it.
    6. connect to the same network .
    7. it will open a setup wizard for you.
    8. follow the on screen instructions and you are good to go now.
    for any question & query feel free to call us on 1-800-603-4024

Written by JESSE
Router Categories