Netgear ac 1200

3 comments

• To update the firmware of your Netgear Ac1200 router Kindly follow these steps:-
  1. Press windows + R key that will open run window for you.
  2. Type CMD in the run box.
  3. Open Ipconfig and check network statistics.
  4. Open your default gateway in any browser.
  5. Type your user name and password .
  6. now you are on router main page .
  7. you need to go to advanced tab and then administration there you will find upgrade of your
  router.
  8. click on update it will take 2-3 minutes and it will reboot your router automatically after
  updation.
  now your firmware of router has been successfully updated.
  you are good to go now. for any help feel free to call us on 1-800-603-4024.

  Reply

• 1.Download the firmware for your router from the official website, save it to your desktop, and unzip the file if needed.
  2.Using a computer that is connected to your router via an Ethernet cable (wired), launch a web browser from a computer.
  3.open the router page by entering the IP address.
  4.Enter the router user name and password.
  5.Select ADVANCED > Administration.
  6.Click the Firmware Update or Router Update button.The button label varies by router.
  7.Click Choose File or Browse.
  8.Locate and highlight the saved firmware on your desktop and click Open > Upload.

  Note: Do not interrupt this process as it might cause corruption, which will make your router unusable.
  Your router reboots after the firmware is uploaded. If your router does not reboot, check the Router Status page to confirm whether the new firmware version uploaded.

  Reply

• Download the firmware from here https://www.netgear.com/support/download/default.aspx

  -Now just connect your device to extender wireless network .
  -Open your browser and search for http://www.mywifiext.net and login with registered email and password.
  -Now Firmware update option is available on left side of the login page.
  -Browse the extract firmware you downloaded and hit update .

  Reply