Leave a reply

  • To setup your Tp Link router you need to follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. that will open a setup wizard for you so follow the steps and you are good to go.
    7. while following the setup wizard kindly make sure the settings you are choosing is correct
    i.e time zone and wireless network name and key.
    8. kindly upgrade the router firmware as well if there is any update pending over there.
    if problem still persists you can reset your router and follow the same steps.
    To connect your devices with this router you just need to go to wireless section of the device and there you will see the name of network. select the network name and type in the password for same and click on connect. Your device will be connected with the router.
    For any help feel free to call us back on 1-800-603-4024.

  • Router setup:-
    Connect one ethernet cable from modem to internet port on router which is located at the back.
    Plug in your router into wall socket
    Wait when you see lights turns solid
    Connect your computer with router hard wired or wirelessly
    Open your web browser and in the address bar type: or or http://tplinkwifi.net.
    Router setup page will comeup
    Follow the onscreen instructions and configure router settings
    Once its configured you can connect your devices with wifi

    For more assistance call us at 1-800-603-4024

  • 1.Connect one Ethernet cable from modem to internet port on router which is located at the back
    2.Led’s will become solid
    3.Router should be connected to the PC hard wired/wireless
    4.Open internet and open this webpage
    5.Router setup page will appear see the instructions given and start setting up the device
    6.Once setup is done try to connect any of your device to test the connection functionality and you are good to go

  • In order to setup your tplink router follow the steps given below:
    > Connect a cable from your modem’s LAN port to the internet port of the router
    > Connect your computer wireless to the routers default SSID or via Ethernet cable
    > Pull up a browser and at the top on the address bar type in and hit enter
    > you will come through your router login screen default username : admin and Password : admin
    > setup page will come up , Follow the instruction to complete the setup
    Note : It should be Dynamic Ip and do not clone the MAC of the computer.

Written by bosn 711
Router Categories