How do i turn off the wireless from my technocolor modem cum router?

3 comments

• There are two separate querries mentioned here let me describe one by one :
  To setup your Linksys EA 6900 kindly follow these steps:-
  You need to plug in a cable from your existing modem to internet port of your router.
  after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
  1. Press windows + R key that will open run window for you.
  2. Type CMD in the run box.
  3. Open Ipconfig and check network statistics.
  4. Open your default gateway in any browser.
  5. Type your user name and password .
  6. that will open a setup wizard for you so follow the steps and you are good to go.
  7. while following the setup wizard kindly make sure the settings you are choosing is correct
  i.e time zone and wireless network name and key.
  8. kindly upgrade the router firmware as well if there is any update pending over there.
  if problem still persists you can reset your router and follow the same steps.
  ———————————————————————————————————————————
  Now to turn off the wireless of your modem kindly follow these steps:-
  there should be a device connected to your modem directly then
  1. Press windows + R key that will open run window for you.
  2. Type CMD in the run box.
  3. Open Ipconfig and check network statistics.
  4. Open your default gateway in any browser.
  5. Type your user name and password
  6.now you are on your modem main page from here you can manage wireless settings as per your requirement.
  For any help feel free to call us back on 1-800-603-4024.

  Reply

• 1.Connect your router to the existing modem
  2.Go to Command prompt and do ipconfig
  3.Open the internet and 192.168.1.1 address
  4. It will prompt you the setup page
  5.Follow the instructions and setup the router
  6.Once configured start connecting your devices

  Reply

• Well in this case you need to access the web based login page of your modem cum router by entering the default IP address of it.
  Go to Command prompt and do ipconfig and you will get the default gateway of your modem router box.
  Now go to the wireless tab and from here you can turn of the wireless SSID broadcat.
  Save the settings and your modem reboots and you are ready to go.

  Reply