Leave a reply

4 comments
  • To setup your Linksys ea7500v2 router you need to follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser(192.168.1.1 is default gateway in general).
    5. Leave your user name blank and type admin in password box.
    6. that will open a setup wizard for you so follow the steps and you are good to go.
    7. while following the setup wizard kindly make sure the settings you are choosing is correct
    i.e time zone and wireless network name and key.
    8. kindly upgrade the router firmware as well if there is any update pending over there.
    if problem still persists you can reset your router and follow the same steps.
    For any help feel free to call us back on 1-800-603-4024.



    0



  • Steps to setup linksys router –
    1.Check the attachment for cable connection with router and modem.
    2.Open the browser on the computer and type http://linksyssmartwifi.com or 192.168.1.1.
    3.Setup wizard will appear just follow the steps on the screen.
    4.Once the setup is completed you can remove the ethernet cable from the computer.



    0



  • To install your router:-
    1. Power on your new router.
    2. Connect the Internet cable from your modem to the yellow Internet port
    on your router. Wait until the power light on the front of the router is
    solid.
    3.Connect your computer to router
    4. Open a web browser and follow the instructions to complete your
    router’s setup. If instructions do not appear in the web browser, enter
    linksyssmartwifi.com in the browser’s address bar.
    5. At the end of setup, follow the on-screen instructions to set up your
    Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage
    your router’s settings, such as:
    • Change your router’s name and password
    • Set up guest access
    • Configure parental controls
    • Connect devices to your network
    • Test your Internet connection speed
    If problem is still persist dial 1-800-603-4024 and get additional help from expertise..



    0



  • 1. Open your default gateway in any browser(192.168.1.1 is default gateway in general).
    2. Leave your user name blank and type admin in password box.
    3. It will open a setup wizard for you so follow the steps and configure the device.
    4. while following the setup wizard kindly make sure the settings you are choosing is correct
    5. Select the WiFi network name and password of your choice and save the settings
    6. kindly upgrade the router firmware as well if there is any update pending over there.



    0



Written by Anne Cary
Router Categories