0
Kayla Thompson
..
0 Subscribers
Submit Answer
0 Answers
to setup your Brother j870w Printer there are several ways i.e by usb cable ,NFC, wps method or with the help of printer panel. you can connect your printer with usb cable first (if possible) then you can turn it into wireless device with the help of basic drivers.
steps to connect your printer with your computer with usb cable :-
1. turn on your printer and wait for few seconds.
2. connect usb cable from your printer to computer.
3. it will take some time as it will check updates and drivers automatically.
4. wait for some time until you see the prompt your device has been successfully installed .
5. just add the printer and you are good to go.
steps to connect yourBrother J870w printer:-(wireless setup)
1. on your printer panel you need to press wi fi button then you will see a blinking
light over there.
2. then you need to go for wireless settings under settings you need to look for
wireless setup wizard.
3. your printer will search for available networks.
4. select your network name and give the right password to it.
5. click on connect it will be connected then you can print test wireless settings
page .
6. then you need to download software for your printer from official hp website.
7. after downloading just follow the setup wizard and you are good to go now.
(you can also connect your printer by wps method)
for any help feel free to call us back on 1-800-603-4024.
TURN ON YOUR PRINTER
PRESS THE WIFI BUTTON ON YOUR PRINTER PANEL AND YOU WILL SEE THE BLINKING WIRELESS LIGHT ON IT.
NOW UNDER WIRELESS SETTINGS LOOK OUT FOR WIRELESS SET UP WIZARD.
NOW PRINTER IS SCANNING FOR THE AVAILABLE NETWORKS THERE.
SELECT YOUR NETWORK AND ENTER THE PASSWORD.
ONCE CONNECTED YOU WILL SEE THE WIRELESS SETTINGS PAGE AGAIN. AND THE WIRELESS LIGHT IS SOLID.
NOW ADD YOUR PRINTER IN YOUR COMPUTER AND TRY TO MAKE A PRINT OUT FROM THERE.
YOU PRINTER IS CONFIGURED NOW
FOR ANY HELP CALL US AT 1-800-603-4024