Why won’t my WiFi work normally after setting the ip address and subnet mask, etc.manually?

2 comments

• As you have mentioned that you have entered ip address and subnet mask manually and there is no internet then your router is not properly setup and the lan tcp/ip settings which you are giving to router its not liking it.Here i am sharing common method to manually update lan tcp/ip settings of your router:-
  1. Launch an Internet browser from a computer or wireless device that is connected to the
  network.
  2. Type http://www.routerlogin.net or http://www.routerlogin.com or default gateway in any
  browser.
  3. Enter the router user name and password.
  The user name is admin. The default password is password. The user name and password are
  case-sensitive.
  The BASIC Home screen displays.
  4. Select ADVANCED > Setup > LAN Setup.
  5. In the IP Address field, type the IP address.
  6. In the IP Subnet Mask, type the subnet mask of the router.
  7. Change the RIP settings. Router Information Protocol (RIP) allows a router to exchange routing
  information with other routers.
  9. Click the Apply button.Your changes are saved.
  By following these steps you can manually update Lan tcp/ip settings.
  For any help feel free to call us back on 1-800-603-4024.

  Reply

• Probably because your manual settings no longer correspond to the prefix that your router is expecting.

  Put it back on automatic and everything will probably just work.
  For manual configuration call us at 1-800-603-4024

  Reply