Leave a reply

1 comment
  • If you are not getting good internet speed after unleashing the linksys wrt3200 acm router kindly follow these steps:-
    1.check your internet speed by speed test on any browser.
    2.Reboot the cable modem.
    3.Reboot the linksys wrt3200acm router.
    4.Update the open source firmware of your router if any update is there for your router.
    5.Verify if signal is strong through the cable modem.
    6.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
    7.Change the ‘Channel’ for 2.4Ghz from Auto to Channel 1 within the router admin (Advanced Settings > Wireless > Wireless Setup)
    8.Clone the ‘MAC Address’ by clicking on the “Clone Your Computer’s MAC Address” button within the router admin (Advanced Settings > WAN > Internet Setup).
    at last you can try this step:-
    9.Go to Advanced Settings > LAN > Host and LAN Settings Change “Enable DNS Proxy” to Off Save.
    your issue will be fixed with these steps .
    if problem still persists there might be some problem with the open source firmware which you have installed manually so reset your router and unleash the router in a proper way.
    To unleash the router properly kindly follow this link http://routerloginsupport.com/question/how-to-enhance-linksys-wrt3200acm-with-open-source-firmware/.
    for any help feel free to call us on 1-800-603-4024


Written by Joe Honea
Router Categories