Leave a reply

3 comments
  • There are several ways to connect your extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
    1. connect your extender in a direct wall socket near by your router for setup.
    2. press wps button on your extender for 3-5 seconds.
    3. press wps button on your router (you can do it by accessing router main page also).
    4. it will be connected to your routers network.
    5. you will see your network name with ext affixed in it.
    6. connect to the same network .
    7. it will open a setup wizard for you.
    8. follow the on screen instructions and you are good to go now.
    9. To connect your devices to network of extender you just need to go to wi fi section of the device and look for extender network name and connect to it.
    (if problem still persists you can reset your device.)
    for any question & query feel free to call us on 1-800-603-4024



    0



  • IF YOUR ROUTER SUPPORTS WPS ,YOU CAN FOLLOW THESE STEPS –
    1.PRESS AND HOLD THE WPS BUTTON ON YOUR ROUTER FOR THREE SECONDS AND THEN YOU WILL SEE A LIGHT BLINKING.
    2.THEN PRESS AND HOLD THE WPS ON YOUR EXTENDER AND YOU WILL SEE A LIGHT BLINKING THERE AS WELL.
    3.NOW YOU WILL SEE THE STABLE POWER LIGHT ON YOUR EXTENDER.
    4.SOLID GREEN MEANS ITS SETUP AND YOU CAN CONNECT YOUR DEVICES.
    5.THE PASSWORD FOR EXTENDERS WIFI WILL BE SAME AS YOUR ROUTER.
    6.NOW FOR EXAMPLE YOUR WIFI NAME IS NETGEAR21 THEN YOUR EXTENDERS NAME WILL BE NETGEAR21_EXT SO YOU CAN CONNECT YOUR DEVICES PASSWORD WILL BE SAME AS THE ROUTER.



    0



  • WPS (WiFi Protected steup) is the best way to setup your extender-

    1.Plug your extender in wall socket .
    2.Wait for atleast 2-3 minutes.
    3.Press the WPS button on the router for 3-5 seconds .LED will start blinking.
    4.Now press the WPS button on your extender for 5 seconds.
    5.It will start blinking .Wait for 3 minutes then the blinking LED will get solid .
    6.Now your extender is setup.Now simply on your wireless device connect to extender network .e.g NETGEAR65_EXT .
    7.Once you are connected open your browser and type http://mywifiext.net .
    8.Setup page will appear .You just need to create an account and you are done with the setup.



    0



Written by DONNA culbreth
Router Categories