How to connect belkin n600 extender with the belkin f7d5301v1 router?
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/uploads/2019/11/avatar_user_6310_1573420556-45x45.jpg)
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
plug the extender into the wall socket at least 5-10 feet away from the router for the setup
press and hold the WPS button on the router for 5 seconds and then on the extender for 5 seconds
now change the location of the extender and you can use the same password as of your router for the extender wifi also
![](https://www.routerloginsupport.com/wp-content/uploads/2019/11/avatar_user_6310_1573420556-96x96.jpg)
Follow these steps:
- Connect your Extender to the power(within 10 ft from the main router, just for the setup purpose)
- After a minute, press and hold the WPS button on your extender for at least 3 seconds and release it and then within 2 minutes, press and hold the WPS button on your Belkin router for at least 3 seconds and then release it
- Then wait for the light to get stable on the extender
- once the light is stable, it means the extender is configured.
- Now you can plug your extender to a different spot.
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
- Connect your Extender to the power(within 10 ft from the main router, just for the setup purpose)
- After a minute, press and hold the WPS button on your extender for at least 3 seconds and release it and then within 2 minutes, press and hold the WPS button on your Belkin router for at least 3 seconds and then release it
- Then wait for the light to get stable on the extender
- once the light is stable, it means the extender is configured.
- Now you can plug your extender to a different spot.