Leave a reply

2 comments
  • To install your router:-
    1. Power on your new router.
    2. Connect the Internet cable from your modem to the yellow Internet port
    on your router. Wait until the power light on the front of the router is
    solid.
    3.Connect your computer to router
    4. Open a web browser and follow the instructions to complete your
    router’s setup. If instructions do not appear in the web browser, enter
    linksyssmartwifi.com in the browser’s address bar.
    5. At the end of setup, follow the on-screen instructions to set up your
    Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to easily manage
    your router’s settings, such as:
    • Change your router’s name and password
    • Set up guest access
    • Configure parental controls
    • Connect devices to your network
    • Test your Internet connection speed
    If problem is still persist dial 1-800-603-4024 and get additional help from expertise..

  • To Configure your Linksys ea6350 router you need to follow these steps:-
    You need to plug in a cable from your existing modem to internet port of your router.
    after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. that will open a setup wizard for you so follow the steps and you are good to go.
    7. while following the setup wizard kindly make sure the settings you are choosing is correct
    i.e time zone and wireless network name and key.
    8. kindly upgrade the router firmware as well if there is any update pending over there.your router
    is successfully configured now.
    ———————————————————————————————————————————————–
    let me also discuss how to update firmware of your router:-
    To update the firmware of your Linksys router you need to follow these steps:-
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. now you are on router main page .
    7. you need to go to advanced tab and then administration there you will find upgrade of your
    router.
    8. click on update it will take 2-3 minutes and it will reboot your router automatically after
    updation.
    now your firmware of router has been successfully updated.
    you are good to go now. for any help feel free to call us on 1-800-603-4024.

Written by Joe Schmid
Router Categories