Leave a reply

4 comments
  • You can change the network name and passowrd .
    Launch an Internet browser and type http://www.routerlogin.net into the address bar.
    Enter the router user name and password when prompted.
    The default user name is admin. The default password is password.
    Click OK.
    The BASIC Home page displays.
    Select Wireless.
    Enter your new user name in the Name (SSID) field.
    Enter your new password in the Password (Network Key) fields.
    Click the Apply button.
    Your changes are saved.

    Now connect your devices with new network name and password



    0



  • router that you are using does not support to block devices ,you can change the name and password to make sure only you have it so that other people can’t connect.



    0



  • 1. Launch the browser and enter the IP address 192.168.1.1 or https://www.routerlogin.net
    2.Enter the username and password and login to the router page
    3. Go to the advanced tab and select the security option from there.
    4. Under this you need to go in the access control settings
    5. Enable the access control and here you can manage which device will work on the wireless .
    6. Apply the settings and now only selected devices will work on wireless connection.



    0



  • To block the devices from wireless connection you need to follow these steps:-
    1. Press windows + R key that will open run window for you.
    2. Type CMD in the run box.
    3. Open Ipconfig and check network statistics.
    4. Open your default gateway in any browser.
    5. Type your user name and password .
    6. This will open your router main page.
    7. Now go to advanced tab then go to security tab.
    8. Under security tab you need to go to access control and then enable it .
    9. Now you can manage you devices as per your expectation.
    If problem still persists feel free to call us back on 1-800-603-4024.



    0



Written by Susan
Router Categories