Leave a reply

4 comments
  • 1.Go ahead and plug in your extender to the wall outlet
    2.When the power light is on and steady on your extender is ready to connect
    3.Your computer should be connected on the extenders wireless network
    4.Once its its connected go to browser and open the extenders default ip address i.e 192.168.1.250 or mywifiext.net
    5.Then login to Extender the page and compete the set up process.
    6.Once set up is completeds your extender will reboot and then ready to go.
    Still if you face any issues you can call us at 1800-603-4024 and ask for help



    0



  • There are several ways to connect your netgear extender i.e ethernet cable method ,wps method and many more but i am sharing wps method here for wps method you need to follow these steps:-
    1. connect your extender in a direct wall socket near by your router for setup.
    2. press wps button on your extender for 3-5 seconds.
    3. press wps button on your router (you can do it by accessing router main page also).
    4. it will be connected to your routers network.
    5. you will see your network name with ext affixed in it.
    6. connect to the same network .
    7. it will open a setup wizard for you.
    8. follow the on screen instructions and you are good to go now.
    9. you can Login to the web user interface of your netgear WiFi Extender using
    http://myWiFiext.net but the device should be connected to extender network.
    (if problem still persists you can reset your device.)
    for any question & query feel free to call us on 1-800-603-4024



    0



  • Steps to configure extender :-

    Connect via Wi-Fi to your NETGEAR WiFi extender
    Login to the web user interface of your NETGEAR WiFi Extender using http://myWiFiext.net.
    You will be prompted to enter a username and password.
    Default login credentials are:
    Username: admin
    Password: password
    Note: Username and password are case sensitive.
    Walk through the setup wizard to setup your connection to your Access Point. (Do not use WPS when reconnecting to the Access Point)
    Reconnect your Wi-Fi devices to your NETGEAR WiFi Extender using either the WPS button or manual connection.
    If problem still persist call at 1-800-603-4024 and get it fixed from expertise.



    0



  • IF YOUR ROUTER SUPPORTS WPS ,YOU CAN FOLLOW THESE STEPS –
    1.PRESS AND HOLD THE WPS BUTTON ON YOUR ROUTER FOR THREE SECONDS AND THEN YOU WILL SEE A LIGHT BLINKING.
    2.THEN PRESS AND HOLD THE WPS ON YOUR EXTENDER AND YOU WILL SEE A LIGHT BLINKING THERE AS WELL.
    3.NOW YOU WILL SEE THE STABLE POWER LIGHT ON YOUR EXTENDER.
    4.SOLID GREEN MEANS ITS SETUP AND YOU CAN CONNECT YOUR DEVICES.
    5.THE PASSWORD FOR EXTENDERS WIFI WILL BE SAME AS YOUR ROUTER.



    0



Written by Richard L. Moczygemba
Router Categories