how to connect the linksys re6400 extender with the linksys ea6350 router using the wps method?

In such condition follow these instruction:

1. Plug your Linksys extender to the Power under 10 feet from your router
2. Once your extender is showing your blinking amber light, then press and hold the WPS button on your extender for 3 seconds and then release it.
3. Then within 2 minutes, press and hold the WPS button on your router for 3 seconds and then release it and wait for the light to get solid green on the extender.
4. once you see the solid green light on the extender, it means your extender is configured.

Plug your Linksys extender to the Power(make sure your extender is plugged in within 10ft. from the Linksys router). Once your extender is showing your blinking amber light, then press and hold the WPS button on your extender for 3 seconds and then release it.Then within 2 minutes, press and hold the WPS button on your router for 3 seconds and then release it and wait for the light to get solid green on the extender.Once you see the solid green light on the extender, it means your extender is configured.

plugin the extender into the wall socket at least 5 to 10 feet away from the router for the initial setup, after setup you can plug it in between the router and the dead spot of your wifi.

now press and hold the WPS button on the router for 10 seconds and then on the extender for 5 seconds and wait till the WIFI lights on the extender

after that you can use the same password as of your router for the extender wifi.

Please follow these steps:

1. Plug your Linksys extender to the Power(make sure your extender is plugged in within 10ft. from the Linksys router)
2. Once your extender is showing your blinking amber light, then press and hold the WPS button on your extender for 3 seconds and then release it.
3. Then within 2 minutes, press and hold the WPS button on your router for 3 seconds and then release it and wait for the light to get solid green on the extender.
4. once you see the solid green light on the extender, it means your extender is configured.

If still facing issue do revert back so that we can help u in a better way....

1. Plug your Linksys extender to the Power(make sure your extender is plugged in within 10ft. from the Linksys router)
2. Once your extender is showing your blinking amber light, then press and hold the WPS button on your extender for 3 seconds and then release it.
3. Then within 2 minutes, press and hold the WPS button on your router for 3 seconds and then release it and wait for the light to get solid green on the extender.
4. once you see the solid green light on the extender, it means your extender is configured.