Leave a reply

4 comments
  • Steps to connect tv with extender :-
    :-Make sure extender is pluggedin and you hace ssid and password
    :-Go to your tv
    :-Click on setup
    :-When prompted to connect with network
    :-Select extender and hit next
    :-Type network password hit next
    :-Tv will update the settings
    :-Once its done we are good to go..
    If problem still persist dial 1-800-603-4024 and get additional help from expertise..

  • Set the switch on the EX6100 to Extender.

    1.Plug the EX6100 into an electrical outlet halfway between your wireless router and computer.
    2.Wait for the Power light to become solid green.
    Note: If the device did not turn on, push the On/Off switch on the side of the EX6100 beside the switch.
    3.On your Television go to settings , view the available wireless networks and connect to the EX6100 signal.
    4..Once connected to the network, the Extender Client Link light will turn on.
    5. Your television is now connected to your network, go ahead and try to access the internet on you television.
    6.Still need any help give us call at 1800-603-4024

  • TO CONNECT YOUR SMART TV WITH YOUR NETGEAR EX 6100 EXTENDER YOU NEED TO FOLLOW THESE STEPS:-

    1. Your Smart Tv sholud be in range of your extender wireless network.
    2. Turn on your smart tv.
    3. Visit your Smart TV’s Network Settings, Network or Settings menu.
    4. Select the WiFi or Wireless option and wait for the device to scan for available wireless networks.
    5. Select your extender WiFi Network Name (also called an SSID) from the list of available networks.
    6. When prompted, enter the Password (also called a Network Key) using the keypad on the remote control handset.
    7. your smart tv is connected with your extender now.
    For any help Feel Free to call us back on 1-800-603-4024.

  • Steps to configure Smart TV with Extender wireless –
    1.Press Home Button on your remote controller.
    2.Use directional key and go to settings.
    3.Select Network .
    4.Select Network settings.
    5.Choose Open connection setting.
    6.Select wireless .
    7.Select Your Host network.
    8.Put your Password.
    It will detect all the settings and will configure your smart tv .

Written by Emilio Ruiz
Router Categories