0
Jonathan jones
Router configuration needed for better connectivity.
0 Subscribers
Submit Answer
0 Answers
You can update the firmware to get better connectivity.
To safely update FirmWare:
1. Save router config to file first using Internet Explorer or Fire Fox with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the F W using IE or FF. Just download the F W file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file.
If problem still persist call at 1-800-603-4024 and get additional help from expertise..
As your linksys ea 6350 disconnects when you are trying to connect two devices you need to check few things :-
1.Reboot the cable modem.
2.Reboot the lnksys router.
3.Update the firmware of your router.
4.Verify if signal is strong through the cable modem.
5.Disable WPS within the router admin (Advanced Settings > Wireless > Wi-Fi Protected Setup).
6.Change the ‘Channel’ for 2.4Ghz from Auto to Channel 1 within the router admin (Advanced Settings > Wireless > Wireless Setup)
7.Clone the ‘MAC Address’ by clicking on the “Clone Your Computer’s MAC Address” button within the router admin (Advanced Settings > WAN > Internet Setup).
at last you can try this step:-
8.Go to Advanced Settings > LAN > Host and LAN Settings Change “Enable DNS Proxy” to Off Save.
your issue will be fixed with these steps if not just reset the router and re configure it.
for any help feel free to call us on 1-800-603-4024.
Just follow these steps-
1.Login into your router first.
2.Go to wireless setting.
3.Change the channel to 11 for 2.4GHz.
4.Check for firmware update in Connectivity .
5.Keep that device in High media priority for better reception and connectivity .
You can reset your router or try updating the firmware –
1.PULG IN THE LINKSYS TO THE WALL OUTLET.
2.WAIT FOR THE LIGHTS TO TURN SOLID ON YOUR ROUTER.
3.NOW MAKE SURE YOUR MODEM IS CONNECTED TO THE LINKSYS ROUTER WITH AN ETHERNET CABLE GOING TO THE INTERNET SLOT OF THE ROUTER.
5.ONCE THE DEVICE IS CONNECTED,OPEN YOUR BROWSER AND OPEN THIS WEBSITE http://www.linksyssmartwifi.com or 192.168.1.1 .
6.NOW YOU NEED TO FOLLOW THE SETUP WIZARD ON THE SCREEN AND YOU ARE GOOD TO GO.
Now after the router is set up follow this guide –
1.Login in your router page and click on connectivity.
2.You will see firmware upgrade and select upgrade firmware.
3.If you find a firmware click on yes to install.
4.Make sure when the router is upgrading you don’t turn off the router.