How do i seperate the 2.4G & 5G band of my Linksys Velop system?
In order to separate the 2.4 and GHz band of the linksys velop system please follow these steps:
Make sure the Velop system is On and connected to your computer with Ethernet or WiFi
open up a browser and at the top most long address bar type in 192.168.1.1 and hit enter it will take u to the setup page
Enter your password go to the wireless settings and disable the Band steering and save the settings.
With this the 2.4 and 5 GHz band will be separated.
if cant able to that do let us know so that we can help u in some other-way...
connect any laptop or computer with the Linksys velop network and then open the browser and in the long address bar type the IP address 192.168.1.1 and it will take you to the login dashboard.
once you are logged in click on the wireless option on the left side menu.
now you will see the names of both the bands over there you can change the name.
- connect your computer with the Velop's wifi network
- open your browser and type this address:- 192.168.1.1 or https://linksyssmartwifi.com
- it will take you to the login page
- enter your login information and once you are logged in,
- then click on the wireless option from the left-hand side
- now you will see that you have the same name for both the bands so from there you can change the name for the 5G band and then save the settings
In order to separate the 2.4 and GHz band of the linksys velop system please follow the instructions below:
Make sure the velop system is On and connected to your computer with ethernet or Wifi
pull up a browser and at the top of the address bar type in 192.168.1.1 and hit enter
Enter your password go to the wireless settings and disable the Band steering and save the settings.
With this the 2.4 and 5 GHz band will be separated.
In order to make any changes on your linksys velop you have to login into the device
to do that you will have to type IP address (192.168.1.1) in the URL bar of any browser .
It will take you to the login dashboard of your device or fill login credential in the login page.
after that you are logged in and you can make any desired changes .
To seperate the 2.4G & 5G band of my Linksys Velop system , first you will have to log in to the admin page . First connect the computer with the router's network . Now open 192.168.1.1 on the browser . you will see the setup wizard , then enter the credentials . After you are successfully logged in , goto settings to separate the network.
to make any changes on the linksys velop you have to login into the device
to do that you have to type the IP address (192.168.1.1) in the URL bar of you browser. it will take you to the login dashboard, fill in the login credentials.
after you are logged in you can make any desired change you want
to make any changes on the linksys velop you have to login into the device
to do that you have to type the IP address (192.168.1.1) in the URL bar of you browser. it will take you to the login dashboard, fill in the login credentials.
after you are logged in you can make any desired change you want