How to setup the amped REC10 Range extender with the Tplink router?

To make a connection between your extender and the router, plug in the extender into the wall socket near your router for the initial setup.

now connect any device with the extender network and open your browser.

in the URL bar of your browser type 192.168.1.240, it will take you to the setup wizard page follow the instructions to complete the setup.

• Turn On your Amped Extender
• connect your computer with the extender's network
• open your browser and type this address:- 192.168.1.240
• It will take you to the setup page
• Click on the scan button
• it will scan for the available networks, then you need to select your tplink router's network and hit next
• now enter your wifi password and hit next again
• after that create your wifi information for the extender and hit next or save
• Now extender will take a few seconds to save the settings
• once the settings are saved, it means your extender is configured

In order to connect your amped range extender to the TP-Link router please follow the instructions below:

Make sure the extender is ON, connect your extender to the computer via ethernet or wireless.

pull up the browser and at the top of the address bar type in 192.168.1.240 and hit enter.

you will be directed to the Amped wireless dashboard, click on the scan button and follow the instruction to complete the setup, make sure you connect your extender to the TplinK router SSID or network name.

To setup the amped REC10 Range extender with the Tplink router , first place the extender near to the router just for the initial setup. Make sure to reset the extender if any changes have been made before. Now connect any computer or any wireless device with the extender's network. Once it's connected , then open 192.168.1.240 on the computer. You will see the setup wizard on the computer , enter the credentials . After you are logged in , click on scan to scan the network that you want to extend . Once it's connected  , save the settings and let the extender reboot . Once you see the solid light on the extender , IT WOULD MEAN IT'S SETUP.

to make a connection between your extender and the router, plugin the extender into the wall socket near your router for the initial setup.

now connect any device with the extender network and open your browser.

in the URL bar of your browser type 192.168.1.240 it will take you to the setup wizard page follow the instructions to complete the setup.

To setup amped REC10 range extender with TPlink router follow these steps:-
>Plugin the amped range extender near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing the reset button for at least 20 seconds.
>Connect any of your wireless device with amped wireless network.
>Open any browser and in the address bar type http://192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that, it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter the password for the same.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.