How do i reconfigure my Tplink RE450 range extender with the xFi Modem/router?
To connect tplink extender to your router, first plugin the extender into the wall socket near to your router for the initial setup and wait till the extender gets fully powered on.
Now press and hold the WPS button on the router for atleast 10 seconds and then within 1 minute press and hold the WPS button on the extender for 5 seconds.
now the WIFI lights on the extender will get solid .
Now connect any laptop or other wireless device with the extender network and then open the browser.
In the long address bar type the IP address (192.168.1.1) it will take you to the extender page over there you can put up the security password and save the settings after that.
In order to reconfigure the Tplink extender, first of all, we need to reset the extender and for that, we have to press and hold the reset button on the extender for at least 15 seconds and then release it. And after that, we can follow the steps which are shown below:-
- connect your computer with the extender’s network
- open your web browser and type this address:- 192.168.0.254
- it will take you to the setup page
- create your login password for the TP-Link extender
- after that, it will scan for the available networks
- select your xFi-modem router’s wifi network and then enter the wifi password and after that hit next
- now create the wifi name for your extender and save the settings
- the extender will reboot to save the settings and once your extender will be rebooted, it means your extender is configured.
In order to reconfigure your tp-link extender to the Vodafone router please follow the instructions below:
before your reconfigure your extender you would have to the reset process for which you would have to press and hold the reset button down for 30 seconds. Once rested wait for the extender to turn On, connect your extender to a computer via ethernet or Wifi, pull up a browser and at the top of the address bar type in 192.168.0.254 and hit enter. you will be directed to the login screen for your tp-link extender click on start setup and follow the instruction during the process make sure connect your TP-Link device to the SSID of your Vodafone router with the same password.
Once the setup is complete reboot the router and the extender and the setup are complete.
To reconfigure my Tplink RE450 range extender with the xFi Modem/router, first we will have to place the extender close to the router , distance should not be more than 10 feet . Now plug in the extedner to the power and wait for 5 seconds . Now to connect first connect any computer or wireless device with the extender’s network and then open 192.168.1.1 on the browser . Now you will have to enter the credentials there . Once you are logged in , then click on scan , to scan the list of available wifi networks and select the network that you wish to extend. Now enter the password of the selected network to be extended. Once it’s done save the settings and after it reboots and light becomes solid , that means it’s connected now.
To connect tplink extender to your router, first plugin the extender into the wall socket near to your router for the initial setup and wait till the extender gets fully powered on.
Now press and hold the WPS button on the router for atleast 10 seconds and then within 1 minute press and hold the WPS button on the extender for 5 seconds.
now the WIFI lights on the extender will get solid .
Now connect any laptop or other wireless device with the extender network and then open the browser.
In the long address bar type the IP address (192.168.1.1) it will take you to the extender page over there you can put up the security password and save the settings after that.
