0
ffd483
0 Subscribers
Submit Answer
0 Answers
1.Use the supplied ethernet cable to plug the camera’s ethernet port into your computer’s ethernet port. You will have to manually
configure your computer’s IP address to be on the 192.168.0.0/24 subnet (something like 192.168.0.2.)
2.The default IP address for this camera is 192.168.0.20. Go there in a browser.
3.Default username: admin, blank password
4.Navigate to the Setup tab (at the top), then click Wireless setup (on the left)
Join your AP by doing a site survey and connecting to your wireless network. Enter your security key (if any) in the passphrase
box.
Reboot to have settings take effect (Maintenance (top) System (left) reboot the device)
Un-plug ethernet cable (it doesn’t appear to connect wirelessly if ethernet is plugged in)
If you haven’t done so, it is highly recommended that you use the setup wizard for your camera first for initial setup and registration with mydlink service.
Step 1: Press the WPS button on your camera for 3 seconds. The WPS LED on your camera should start blinking blue.
Step 2: Within 60 seconds, press the WPS button of the router that you want to connect.
Step 3: The WPS LED on your camera will automatically configure its wireless settings, and the WPS LED will turn solid blue, then your camera will reboot and connect to your wireless network.
Note: If your router does not have a physical WPS button, you may need to activate WPS through its web interface.
Still if you need any help …..you can call us at 1800-603-4024
To pair your D-Link wireless camera to Linkys WRT-1900 router you need to follow these steps:-
you can use wps method kindly follow these steps:-
1.Press the WPS button on your camera for 3 seconds. The WPS LED on your camera should start
blinking blue.
2.now press the WPS button of the router that you want to connect.(either you can push wps button on your router or you can log in to your router main page and from there you can press wps symbol).
3.it will take some time and when it will be connected you will see a solid blue light over there.
4. your camera will reboot and then it will automatically be connected to your linksys network.
you need to register your d link device with d link services as well. for any help feel free to call us back on 1-800-603-4024.