How do I setup Amped extender REC33A with xfinity router ?
- Turn On your Amped Extender
- Connect your computer or smartphone with the Extender's network
- Once your computer is connected, then Open your browser and type this address:- 192.168.1.240
- It will take you to the setup page
- Click on the scan button, then it will search for the available wifi networks
- Select your wifi network and then hit next
- After that enter your wifi password and hit next
- create your wifi information for your Amped extender and then save the settings.
To connect amped extender to your router, first plugin the extender into the wall socket near to your router for the initial setup and wait till the extender gets fully powered on.
Now press and hold the WPS button on the router for atleast 10 seconds and then within 1 minute press and hold the WPS button on the extender for 5 seconds.
now the WIFI lights on the extender will get solid .
Now connect any laptop or other wireless device with the extender network and then open the browser.
In the long address bar type the IP address (192.168.1.240) it will take you to the extender page over there you can put up the security password and save the settings after that.
In such case you need to plugged in your extender to the wall socket under 10 to 15 feet for the router just for the initial setup now you need to press the wps button of the extender for 3 second and then press the wps button of the router for 3 second and then wait for some seconds when light get solid it means your extender is configured.
To setup Amped extender REC33A with xfinity router, first plug in the extender to the power and place it near to the main router just for the initial setup. After it's plugged in , wait for 2 minutes and press and hold the WPS button for 3 seconds,once you do this you will see flashing light on the extender, now within 2 minutes press and hold the WPS button on the router for 3 seconds, again you will see the flashing light on the router as well. After the lights are solid , this means that it's all set up . Now you can try connecting the devices to the extender's network.
In order to set up an Amped REC33A range extender with the Xfinity Wi-Fi please follow the instructions below:
Process 1 :
Turn on the range extender and wait until it boots up, Once you see a solid power light press and hold the WPS button the range extender for 3 seconds and you will see a flashing light on the extender, then within a minutes time you need to press and hold the WPS button on the Xfinity router for 3 seconds . once you see the flashing light on the range extender goes to a solid light it means the setup is complete.
Process 2:
Make sure the extender should be On, Connect your computer or laptop with the extender's network and then pull up a browser and at the top of the address bar type in 192.168.1.240 and hit enter. You will be directed to the range extender setup screen for your range extender. Click on the Scan button follow the setup instruction and complete the setup.