Leave a reply

4 comments
  • Install the NETGEAR WNDA3100.
    Insert the USB adapter.
    After you have installed the NETGEAR Smart Wizard, the following screen displays:
    Use the Smart Wizard to set up your wireless USB adapter.
    Connecting to a Wireless Network
    Once the network is connected you are able to go online and access the internet
    Still you are facing any issues you can call us at 1800–603-4024



    0



  • Below are instructions on how to configure and setup the NETGEAR wireless adapter using the NETGEAR Smart Wizard software utility.

    Configuring Smart Wizard for WEP encryption

    Click Start then go to All programs. Look for NETGEAR wireless adapter folder then select the NETGEAR Smart Wizard.
    NETGEAR Smart Wizard wireless utility should appear on your desktop screen.
    Click on the Networks Tab. This will automatically scan for all the available wireless network within your proximity.
    Select the SSID of the wireless network that you want to connect, then hit the Connect button.
    On the Settings tab, click WEP under the Security option then select Enter Key Manually.

    Type the 10 or 26 characters (Hexa decimal) keys on the space provided.
    In the Profiles field, assign a name to help you remember this wireless network settings in the future, then click Save Profile.
    Click Apply to validate the settings.
    Once connected wirelessly, go to the About tab and check for an IP address.
    Call at 1-800-603-4024 and get additional help from expertise.



    0



  • To install Netgear adapter wnda3100 you need to follow these steps:-

    1. first you need to install software suite on your computer either with resource cd or from netgear
    official website by choosing right model number.
    2. After installation just open the setup file (that should be autorun.exe file)
    3. Install the setup software using one of the following methods.
    – Connected to the Internet. If you are connected to the Internet,
    click the Check for Updates button. After the software checks
    for updates, the Update Check Complete screen displays. Click the
    Continue button. The Welcome screen displays.
    – Not connected to the Internet. If you are not connected to the
    Internet, click the Install from CD button. The Welcome screen displays.
    4. Insert the adapter into a USB port on your computer with or without the
    USB cable and plastic cradle.
    5. now follow the onscreen instructions and you are good to go.
    if you find any problem while connecting feel free to call us on 1-800-603-4024.



    0



  • Its a Plug and Play device so follow these simple steps-

    1.Plug your Adapter into your computer’s USB port.
    2.Smart setup wizard will appear .
    3.Follow the steps and setup the Ssid and other settings.
    4.Once the setup is completed you can try connecting on the network and see that wireless is working or not.



    0



Written by johnny chitty
Router Categories