Leave a reply

5 comments
  • Netgear Extender Setup-
    -Connect Your extender in wall socket .
    -Once you see extender wireless name on your device just connect to it.
    -Open your browser and type http://myywifiext.net or 192.168.1.250 /192.168.1.254
    -Setup wizard will ask you to create an account.
    -Wizard will help you to setup your extender.

  • IF YOUR ROUTER SUPPORTS WPS ,YOU CAN FOLLOW THESE STEPS –
    1.PRESS AND HOLD THE WPS BUTTON ON YOUR ROUTER FOR THREE SECONDS AND THEN YOU WILL SEE A LIGHT BLINKING.
    2.THEN PRESS AND HOLD THE WPS ON YOUR EXTENDER AND YOU WILL SEE A LIGHT BLINKING THERE AS WELL.
    3.NOW YOU WILL SEE THE STABLE POWER LIGHT ON YOUR EXTENDER.
    4.SOLID GREEN MEANS ITS SETUP AND YOU CAN CONNECT YOUR DEVICES.
    5.THE PASSWORD FOR EXTENDERS WIFI WILL BE SAME AS YOUR ROUTER.

  • Steps to configure Netgear extender wn2550rp :-

    Reset your NETGEAR WiFi Extender back to factory default settings.
    To do this, press and hold the Factory Settings button on the side panel for 7 seconds.
    Connect via Wi-Fi to your NETGEAR WiFi extender
    Login to the web user interface of your NETGEAR WiFi Extender using http://myWiFiext.net.
    You will be prompted to enter a username and password.
    Default login credentials are:
    Username: admin
    Password: password
    Note: Username and password are case sensitive.
    Walk through the setup wizard to setup your connection to your Access Point. (Do not use WPS when reconnecting to the Access Point)
    Reconnect your Wi-Fi devices to your NETGEAR WiFi Extender using either the WPS button or manual connection.

  • TO CONNECT YOUR NETGEAR EXTENDER YOU NEED TO FOLLOW THESE STEPS
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3.PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE ALSO).
    4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5.YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6.CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.

  • THERE ARE SEVERAL WAYS TO CONNECT YOUR NETGEAR EXTENDER I.E ETHERNET CABLE METHOD ,WPS METHOD AND MANY MORE BUT I AM SHARING WPS METHOD HERE FOR WPS METHOD YOU NEED TO FOLLOW THESE STEPS:-
    1. CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET NEAR BY YOUR ROUTER FOR SETUP.
    2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
    3. PRESS WPS BUTTON ON YOUR ROUTER (YOU CAN DO IT BY ACCESSING ROUTER MAIN PAGE
    ALSO).
    4. IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK.
    5. YOU WILL SE YOUR NETWORK NAME WITH EXT AFFIXED IN IT.
    6. CONNECT TO THE SAME NETWORK .
    7. IT WILL OPEN A SETUP WIZARD FOR YOU.
    8. FOLLOW THE ON SCREEN INSTRUCTIONS AND YOU ARE GOOD TO GO NOW.
    (IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR DEVICE.)
    FOR ANY QUESTION & QUERY FEEL FREE TO CALL US ON 1-800-603-4024.

Written by Angelo Taylor
Router Categories