how to setup belkin n600 on to my network?
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/uploads/2019/01/avatar_user_1249_1548260490-45x45.jpg)
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
![](https://www.routerloginsupport.com/wp-content/uploads/2019/10/avatar_user_5363_1571598555-45x45.jpg)
![](https://www.routerloginsupport.com/wp-content/uploads/2019/10/avatar_user_5363_1571598555-96x96.jpg)
To setup Belkin n600 on to my network first plug in the extender into the wall and reset if you made any change on the extender before . Now connect any of computer with extender's network.Now open 192.168.206.1 or Belkin.range.com. you will see the setup wizard in the page then you need to follow the instructions to setup the range extender.Now save the settings and let the extender reboot after settings are saved.Once you see the lights on the extender is solid you can then connect your devices to the extended network.
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
plugin the extender into the wall socket at least 10 feet from the router just for the initial setup
now connect any wireless device with the connection of the extender and then open the browser on the device
after that type, the IP address on the long address bar of your browser and it will take it to the setup wizard page
follow the instructions over there to complete the setup
Now you can set up the security password for the extender connection
save the settings and the extender is now ready to work
![](https://www.routerloginsupport.com/wp-content/plugins/wp-user-avatars/wp-user-avatars/assets/images/mystery.jpg)
to reset your belkin extender you need to press and hold the reset pin hole for 30 seconds
once it done light start blinking that mean device is properly reset i and now its ready to sync again
![](https://www.routerloginsupport.com/wp-content/uploads/2019/01/avatar_user_1249_1548260490-96x96.jpg)
To setup Belkin n600Â range extender follow these steps:-
>Plug in the range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any of your wireless or wired devices with Belkin extender wireless network(i.e Belkin.Setup).
>Open any browser and in the address bar type http://192.168.206.1 or http://belkin.range
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender.
>If you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.