How to configure router?

2 comments

• You need to check few things before you can reach this website-

  1-Check is there 4 solid green lights on the extender or not.If not You need to setup it again.
  2-Press WPS on the router for 5 seconds then on extender for 3 seconds .Wait until you see solid Wps Led.
  3-Open your browser and type there http://mywifiext.net / 192.168.1.250 or 192.168.1.254 .
  4-You will see new extender setup.
  5-Hit that and begin the setup .
  I believe it will help you.
  Otherwise call us on our toll free -1-800-603-4024 for Free Support from our extender experts 24/7 .

  Reply

• AS PER YOUR PROBLEM YOU NEED TO CHECK FEW THINGS HERE:
  1. ARE YOU PROPERLY CONNECTED TO THE NETWORK WHICH YOU ARE TALKING ABOUT.
  2. CHECK THE STATUS OF LIGHTS ON ROUTER , MODEM .
  3. PING GOOGLE.COM ON CMD WINDOW.
  AFTER THAT YOU CAN POWER CYCLE THE DEVICES( ROUTER , MODEM ) AND TRY TO CONNECT THEN , IF PROBLEM STILL PERSISTS YOU CAN RESET YOUR ROUTER AND RE SETUP THE ROUTER BY FOLLOWING THESE STEPS:-
  You need to plug in a cable from your existing modem to internet port of your router.
  after connecting this cable connect a cable from port no-4 of your router to your computer. then follow these steps:
  1. Press windows + R key that will open run window for you.
  2. Type CMD in the run box.
  3. Open Ipconfig and check network statistics.
  4. Open your default gateway in any browser.
  5. Type your user name and password .
  6. that will open a setup wizard for you so follow the steps and you are good to go.
  7. while following the setup wizard kindly make sure the settings you are choosing is correct
  i.e time zone and wireless network name and key.
  8. kindly upgrade the router firmware as well if there is any update pending over there.
  if problem still persists you can reset your router and follow the same steps.
  For any help feel free to call us back on 1-800-603-4024.

  Reply