How do i configure my Amped REC10 Range extender with Ubee Modem/Router?
To setup REC10 range extender , first plug in the extender near to the router, just for the initial setup.Reset the extender if any changes are made before,after it's reset , connect any wireless device with the extender's wireless network.Now open 192.168.1.240 on the browser or setup.ampedwireless.com.You will see the scan button on the setup page,click on scan .This will start all available network nearby. connect the network that you want to extend,enter the password.On the next page it will let you change the network name or the password for the extender's network.Now save the settings and let the extender reboot.once it is rebooted and you see the solid light on the extender,then you can connect the devices to the extended network.You can go online to check if the extender is setup successfully.
To setup amped rec10 range extender follow these steps:-
>Plugin the amped range extender near to your Ubee Modem/Router router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any one of your wireless or wired devices with the amped wireless network.
>Open any browser and in the address bar type http://192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter the password for your home wifi.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it or you can also clone the settings over there.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
To setup amped range extender follow these steps:-
- Plugin the amped range extender near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 20 seconds. - Connect any of your wireless device with amped wireless network.
- Open any browser and in the address bar type 192.168.1.240 or http://setup.ampedwireless.com
- Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
- From the list select network that you want to extend and then enter password for the same.
- In the next step if you want you can change the name of extended network and password of your choice that you want for it.
- Now save the settings and range extender will reboot after saving the settings.
- Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.