How to configure amped re2600m extender with the xfinity router’s wifi?

To setup you Amped extender with xfinity router you need to Follow these steps :

1. At first you need the password of xfinity router that help you in setting up your extender.
2. Plugged in your extender nearby your router and then wait for 3 to 5 minutes .
   Press the WPS button on your Amped Extender for 5 seconds and within 1 minute press the WPS button on your xfinity router for 5 seconds and wait for 5 minutes .
   When you see all solid light on your extender then go to your computer or mobile phone and then go to the wifi over there. Where you see xfinity_RE network or Amped extender in the list. Please connect your you devices with this network and put you xfinity router password ( If it ask for the password) . once you connected with that network then check internet is working fine, if it is then your extender is configured properly. Now if you want you will able to move your extender where ever you wanted.

To setup amped re2600m range extender follow these steps:-
>Plugin the amped range extender near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Connect any one of your wireless or wired devices with the amped wireless network.
>Open any browser and in the address bar type http://192.168.1.240 or http://setup.ampedwireless.com
>Now you will see the SCAN button on the page, click on it and after that it will scan the wireless networks nearby to it.
>From the list select network that you want to extend and then enter the password for your home wifi.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it or you can also clone the settings over there.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.

You can setup your amped extender using the WPS button.

Note(make sure that the extender is kept closer to the router under 5 feet)

1. Press and hold the WPS button on the amped Extender for 5 seconds.
2. Within 2 minutes, press the WPS button on your wireless router.And wait for at least 2 minutes while the extender connects to your existing wireless network.If successful, the WPS LED on your Extender turns solid green.