How to reconfigure my Dlink DAP-1750 with Bell Hub 3000?
Turn On your extender
Connect your computer or smartphone with the extender's network
Then Open your web browser and type this address:- 192.168.0.50 or https://dlinkap.local
Now it will take you to the extender's setup page.
Follow the procedure and complete the setup process.
or we can also configure our extender with the wps method
for that we need to press and hold the wps button from the extender for 3 seconds and then release it and with in 2 minutes press and hold the wps for 3 seconds on the bell hub router and then release it.
once your extender is showing stable light it means that extender is configured.
To setup Dlink DAP-1750 range extender follow these steps:-
>Plugin the Dlink range extender near to your Bell Hub 3000 for the initial setup.
*If you made any change on the Dlink extender before, then reset the extender by pressing reset button for at least 20 seconds.
>Connect any of your wireless device with Dlink extender network.
>Open any browser and in the address bar type http://192.168.0.50 or http://dlinkap.local
>Now you will see the setup wizard on the page, click on it and after that follow the onscreen instructions.
>From the list select network that you want to extend and then enter password for the same.
>In the next step if you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and wait for the lights to get stable.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.
