0
timothy belcher
HOW TO SETUP MY dlink DIr 880l ?
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
- Turn On your Dlink router
- Connect an Ethernet cable between your modem and the Dlink router(make sure cable should be connected to the Internet port of the Dlink router)
- After that connect your computer with the Dlink router(using Ethernet cable or using Wi-Fi)
- Now open your web browser and type this IP address:- 192.168.0.1
- It will take you to the setup page
- Follow the instructions on the screen and complete the setup process.
For setup D-Link DIr 880l you need to connect your router first with modem –
-From modem connect a cat5 cable to router yellow port.
-Now from D-Link router black port connect your computer.
-On your computer if it’s a wireless then connect to wireless network .
-Open your browser and type 192.168.0.1
-Setup wizard will ask for login just leave it blank and login.
-Setup wizard will start and now just follow the steps.
Once setup is done remove the cable from computer.
TO SETUP YOUR DLINK DIR 880L YOU NEED TO FOLLOW THESE STEPS:-
1. PLUG YOUR ROUTER TO A WALL SOCKET.
2. CONNECT AN ETHERNET CABLE FROM YOUR MODEM TO INTERNET PORT OF YOUR ROUTER.
3. CONNECT AN ETHERNET CABLE FROM PORT NO 4 TO YOUR COMPUTER.
4. CHECK YOUR NETWORK STATISTICS BY DOING IPCONFIG ON CMD WINDOW.
5. OPEN A BROWSER TYPE YOUR DEFAULT GATEWAY IN ADDRESS BAR HIT ENTERS.
6. IT WILL GIVE YOU A SETUP WIZARD YOU NEED T0 FOLLOW THE STEPS AND YOU ARE GOOD TO GO NOW.
IN CASE YOU FIND ANY PROBLEM FEEL FREE TO CALL US BACK ON 1-800-603-4024.