how to setup TL-WA855RE tp link extender

2 comments

• >Turn On your extender
  > Connect your computer or smartphone with the extender's network
  > Now open your web browser and type this address:- https://tplinkrepeater.net or 192.168.0.254 or 192.168.1.254
  > Click on start
  > now it will scan for the available networks
  > select your wifi network that you want to extend and then enter the same password for that network that you were using
  > after that it will connect to your network
  > Now it will show you your extended network name (Note:-make a little bit change in the network name)
  > save the settings
  or
  you can also configure it through wps method:-
  press and hold the wps button from your extender for at least 3 seconds and then within 2 minutes press and hold the wps button from your main router for at least 3 seconds.

  Reply

• Some steps you need to follow in order to connect your TL-WA855RE :
  > Plug your TP-Link extender into a wall outlet.
  > Connect it to your computer with an Ethernet cable.
  Or
  * once it shows blue or amber light.
  * check your wifi list and connect to it.
  ONCE CONNECTED
  > Open a browser on and navigate to http://tplinkrepeater.net. If that doesn’t work, try typing = 192.168.0.254(extenders IP)
  > Select Quick Setup and Next.
  > Select your region and Next.
  > Let the TP-Link extender scan for wireless networks. It might take a minute or two.
  > Select your wireless network from the list that is generated and select Next.
  > Enter the wireless password when prompted.
  Select ‘Copy from main router’ if you want a single larger wireless network or ‘Customize’ if you want to create a different network.
  Select Next.
  > Review the network settings in the final window.
  > Select Finish if all correct.

  Reply