How to setup wicommfi extender using my cellphone?
connect your phone to the wicommfi extender open the browser in the URL bar type the IP address 192.168.10.1Â it will take you to the setup page
follow the instructions there and apply the settings.
> Turn On your Wicommfi Extender
> connect your computer with the extender's network
> open your browser
> type this address:- 192.168.10.1
> enter the login information(username is admin and password is also admin)
> now it will show you three operational modes:- router, repeater and access point
> select repeater option if you want to configure it as a extender
> now it will scan for available wifi networks
> select your wifi network that you want to extend
> below that create your wifi name for both the bands(2.4 and 5.8) and enter your existing wifi network password that selected
> hit connect
> setup complete.
wicommfi is the easiest extender to setup till date. though it will work everytime , if by slight 1% chance it doesn't ,then
follow the following steps
Type the actual IP of the extender 192.168.10.1
Steps to connect :
1. If you have a smart phone just scan the QR code.
2. You will be directed to the setup page straight away.
> Login
username = admin
password = admin
> Choose repeater mode (wait for few sec)
> Choose a name and setup a password for your wireless network after the scanning is done.
* To choose Access point
> Select AP mode
type name and password you want for AP wicommfi (make sure its connected with ethernet cable)
* Choose router mode if you dont have a router
> Type in name and password choose apply
> Make sure wicommfi should be connected to the modem with an ethernet cable
wicommfi is the easiest extender to setup till date. though it will work everytime , if by slight 1% chance it doesn't ,then
follow the following steps
Type the actual IP of the extender 192.168.10.1
Steps to connect :
1. If you have a smart phone just scan the QR code.
2. You will be directed to the setup page straight away.
> Login
username = admin
password = admin
> Choose repeater mode (wait for few sec)
> Choose a name and setup a password for your wireless network after the scanning is done.
* To choose Access point
> Select AP mode
type name and password you want for AP wicommfi (make sure its connected with ethernet cable)
* Choose router mode if you dont have a router
> Type in name and password choose apply
> Make sure wicommfi should be connected to the modem with an ethernet cable
wicommfi is the easiest extender to setup till date. though it will work everytime , if by slight 1% chance it doesn't ,then
follow the following steps
Type the actual IP of the extender 192.168.10.1
Steps to connect :
1. If you have a smart phone just scan the QR code.
2. You will be directed to the setup page straight away.
> Login
username = admin
password = admin
> Choose repeater mode (wait for few sec)
> Choose a name and setup a password for your wireless network after the scanning is done.
* To choose Access point
> Select AP mode
type name and password you want for AP wicommfi (make sure its connected with ethernet cable)
* Choose router mode if you dont have a router
> Type in name and password choose apply
> Make sure wicommfi should be connected to the modem with an ethernet cable
> Turn On your Wicommfi Extender
> connect your computer with the extender's network
> open your browser
> type this address:- 192.168.10.1
> enter the login information(username is admin and password is also admin)
> now it will show you three operational modes:- router, repeater and access point
> select repeater option if you want to configure it as a extender
> now it will scan for available wifi networks
> select your wifi network that you want to extend
> below that create your wifi name for both the bands(2.4 and 5.8) and enter your existing wifi network password that selected
> hit connect
> setup complete.
Same steps will be done on the smartphone.
Plugin the range extender into the wall socket near to your home router for the initial setup.
*If you made any change on the extender before, then reset the extender by pressing reset button for at least 30 seconds.
>Once the lights get stable connect any of your wireless devices with Wicommfi extender's wireless network.
>Open any browser and in the address bar type 192.168.10.1
>In the login page type username (admin) and password (admin)
>Now you will see the setup wizard in the page, follow the instructions to setup the range extender.
>If you want you can change the name of extended network and password of your choice that you want for it.
>Now save the settings and range extender will reboot after saving the settings.
>Once extender lights get solid connect your devices to the extended network and try to go online so that we can check that extender setup done successfully.