How to configure tplink EAP245 Access point?

> Connect your access point with your main router using an ethernet cable.
> then go to the web interface of the main router on your computer:-
For that type the default ip address of your router on the browser and
then enter the login information
> Now check the connected devices and look for the access point and get the ip address for that device
> type that ip address on your web browser and then it will take you to the login page of the access point
Now enter the login information for the access point(default username and password is admin) and from there we can configure the access point.

In order to set up a Tplink eap245 Access Point, Please follow the instructions below:

Make sure the Tplink eap245  AP is powered ON

Connect a cable from the AP eap245  to the computer

Pull up a browser and then at the Top on the address bar type in 192.168.0.254

You will be directed to the Login screen for you AP eap245  the default username and the password is "admin"

Go to the wireless settings of the AP eap245 and then change the name and the password for your Wifi and save the settings

Once that's done connect the ethernet cable from your router to the extender and we should be good then

> Try and connect your device to the Wifi of your AP eap245  and you should be Online then.

Few steps you need to follow:

* Step 1
Connect your computer to the EAP device with an Ethernet cable.

*Step 2
Remember your computer’s current IP settings and manually assign a static IP address 192.168.0.100 for your computer.

*Step 3
Launch the web browser and enter the IP address 192.168.0.2.

*Step 4
Type in the username and password (both are admin in lower case by default) into the boxes of the login page and Login.

* Step 5
After that just keep clicking on "NEXT" by following the instruction

>You are good to go.