0
Terry220
How do i connect my Belkinย ext(f9k1015v1) with my old network spectrumย ?
0 Subscribers
Submit Answer
0 Answers
Use a computer to connect to BELKIN WiFi Extender via Ethernet cable.
Login to the web user interface of your BELKIN WiFi Extender using http://setup.belkin.com
You will be prompted to enter a username and password.
Default login credentials are:
Username: admin
Password: admin
Note: Username and password are case sensitive.
Once you have successfully logged in, go to Setup > Wireless Settings.
Check the value in the Password (Network Key) field under Security Options.
If the password is not same as your router password, change it so it matches.
Click Apply.
Reconnect your Wi-Fi devices to the BELKIN WiFi Extender.
In this case, you need to follow below-mentioned steps-
>first of all if you made any changes on it you need to reset your Belkin F9K1015 V1 Range Extender by pressing the Reset button for 20 seconds(while it’s powered on).
>Once the Extender lights stop flashing then you can easily reconfigure it simply by performing WPS Method on it.
> To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 3 seconds.
> Once you find that the lights of the extender are solid/stable, you can connect to its network using the router’s WiFi password with any of your wireless devices and then try to go online so that you come to know its working fine.
*If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.
For new Belkin f9k1015v1 Extender.
Just press the WPS on your router/modem first for 1-2 seconds, then press the WPS on Belkin f9k1015v1 Extender for 3-5 seconds.
Now wait for 2 minutes.
The difference in light color and pattern will confirm its connection.
For Used/ old Extender: If its an used Belkin f9k1015v1 Extender then first reset it using a paper clip to press the reset button in a tiny hole for 30 seconds.
Now its brand new, or by default one.
Wait for 2 minutes after reset then proceed further as setup New Belkin f9k1015v1 Extender.
Its now extending your home network with same password as of your home wifi.
Note:
1. During setup, make sure that the Belkin f9k1015v1 Extender is placed within 7-10 feet from Router, at the time of setup, or in the same room.
2. Two minutes patience is the Critical Time that make the difference between success and failure in Setup.
In order to configure the Belkin range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
>For Used/ old Extender: If its an used Belkin f9k1015v1 Extender then first reset it using a paper clip to press the reset button in a tiny hole for 30 seconds.
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.206.1
> You will get through a login window default username: and the Password :
> click on quick setup and Continue , Follow the instructions to complete the setup