how to setup linksys extender?

3 comments

• STEP 1 Connect your computer to the Ethernet port of your range extender using an Ethernet cable
  STEP 2 Plug your range extender to the power outlet. Make sure the LED lights are stable
  STEP 3 Launch a web browser and enter your router’s IP Address or “192.168.1.1” in the Address bar. You will be prompted with a window asking for a username and password.
  STEP 3 You will be prompted with a window asking for a username and password. Leave the User Name blank and enter “admin” in the Password field and then, click Log In.
  STEP 4 Click Wireless > Basic Wireless Settings.
  STEP 5 Set the radio button to Manual then enter your router’s Network Name (SSID).
  STEP 6 On the Wireless Security section, select the security settings that match your router’s configuration. Enter your
  WEP Key then click Save Settings
  STEP 7 Unplug the power cables of the router and the range extender for 30 seconds. Plug in the router first. Wait for all the lights to be stable then plug in the range extender.
  Your range extender should now be in synchronized with your router.

  
  
  

  0

  
  
  

  Reply

• You can follow these steps to setup your Linksys RE6300 Range Extender:-
  >Place the Linksys range extender nearby to your home router and power it on for the initial setup.
  >Press the WPS button on your extender and hold it down for 3-5 seconds.
  >Within the 1-minute press WPS button on your home router.
  >Wait for the extender lights get stable and now try to connect any of your wireless devices with the extended network.
  *If you want to connect your range extender with 5GHz network then repeat the same steps once again.

  
  
  

  0

  
  
  

  Reply

• In order to set up the Linksys Range extender you would need to follow the following steps:
  Step 1
  > First connect your computer wireless or wired to the range extender
  > login to extender.linksys.com or 192.168.1.1
  > initiate the setup.
  Step 2
  > Press the WPS button on the router first for 3 seconds and then on the extender for 3 seconds once the light on the extender stops blinking the setup is complete.

  
  
  

  0

  
  
  

  Reply