0
William Bates
how to setup a linksys Router after a hard reset?
0 Subscribers
Submit Answer
1 Answers
Best Answer
0
- connect an ethernet cable between the router and the modem and make sure that cable should be plugged in to the internet slot of the router.
- and then Turn On your router
- connect your computer with the router's wifi network or you can also connect an ethernet cable from the router.
- open the web browser and type this address:- https://linksyssmartwifi.com or 192.168.1.1
- now follow the instructions on the page and complete the setup process.
- once the setup is complete, router is ready to use.
Replying as
Submit
In order to setup your Linksys router, after a hard reset follow the steps given below:
> Connect a cable from your modem’s LAN port to the internet port of the router
> Connect your computer wireless to the routers default SSID or via Ethernet cable
> Pull up a browser and at the top on the address bar type in 192.168.1.1 or https://www.linksyssmartwifi.com and hit enter
> you will come through your router login screen default username : admin and Password : admin
> setup page will come up , Follow the instruction to complete the setup
connect an ethernet cable between the router and the modem and make sure that cable should be plugged in to the internet slot of the router.
and then Turn On your router
connect your computer with the router's wifi network or you can also connect an ethernet cable from the router.
open the web browser and type this address:- https://linksyssmartwifi.com or 192.168.1.1
now follow the instructions on the page and complete the setup process.
once the setup is complete, router is ready to use.