0
Karen Warner
how to setup a range extender Belkin?
0 Subscribers
Submit Answer
0 Answers
In this case, you need to follow below-mentioned steps-
>first of all if you made any changes on it you need to reset your Belkin Range Extender by pressing the Reset button for 20 seconds(while it’s powered on).
>Once the Extender lights stop flashing then you can easily reconfigure it simply by performing WPS Method on it.
> To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute, you need to press the same WPS button of your Belkin Extender for 3 seconds.
> Once you find that the lights of the extender are solid/stable, you can connect to its network using the router’s WiFi password with any of your wireless devices and then try to go online so that you come to know its working fine.
*If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.
How to setup an Belkin Range Extender?
For new Belkin Range Extender.
Just press the WPS on your router/modem first for 1-2 seconds, then press the WPS on Belkin Range Extender for 3-5 seconds.
Now wait for 2 minutes.
The difference in light color and pattern will confirm its connection.
For Used/ Old Belkin Range Extender: If its an used Belkin Range Extender then first reset it using a paper clip to press the reset button in a tiny hole for 30 seconds.
Now its brand new, or by default one.
Wait for 2 minutes after reset then proceed further as setup New Belkin Range Extender.
Its now extending your home network with same password as of your home wifi.
Note:
1. During setup, make sure that the Belkin Range Extender is placed within 7-10 feet from Router, at the time of setup, or in the same room.
2. Two minutes patience is the Critical time that make the difference between success and failure in Setup.
3. Best of luck
TO SETUP A BELKIN RANGE EXTENDER FOLLOW THE FOLLOWING STEPS :-
> Plug in your range extender into a power outlet that is within the range of your router’s wireless networ
> Using your Wi-Fi-capable device, locate and connect to the Belkin.setup network.
>Launch a browser and enter “http://belkin.range” in the Address bar then tap Go.
>On the page that opens, tap on Get Started.
>Select the wireless network you want to extend. Tap Next once done.
>When prompted, enter your wireless network’s password then tap Next.
>If you have a dual-band network, select the second wireless network you want to extend then repeat
>Review the Extended Network information. Tap Edit if the information needs to be changed. Otherwise, tap the Create Extended Network button to proceed with the setup.
>Your extender is now configured. You will see your network settings on the screen, and you will have the option to print the information when needed.
In order to configure the Belkin range extender you need to follow the instructions below:
> plug in your extender near to the router for the initial setup within 10 feets
> Press the WPS button on the router for 3 -4 seconds and then on the Extender for 3- 4 Seconds
> Once you see the light stopped flashing on the extender it means the extender is setup now
Step 2
> Connect your computer wireless to the extended network
> pull up browser and at the very top type in 192.168.206.1 or 192.168.2.1
> You will get through a login window default username: admin and the Password : admin
> click on quick setup and Continue , Follow the instructions to complete the setup