BELKIN EXTENDER NOT WORKING

3 comments

• In this case you need to follow below mentioned steps-
  >first of all you need to reset your Belkin Range Extender by pressing Reset button for 10-15 seconds(while it’s powered on).
  >Once the Extender lights stops flashing then you can easily reconfigure it simply by performing WPS Method on it.
  > To do WPS process you need to press the WPS button of your home router for 3 seconds and then within 1 minute you need to press the same WPS button of your Belkin Extender for 3 seconds.
  > Once you find that the lights of the extender are solid/stable, you can connect it using the router’s wifi password with any of your wireless device and then try to go online so that you come to know its working fine.
  *If you still face any kind of trouble with your Router or Extender do write us back so that we can help you accordingly.

  
  
  

  0

  
  
  

  Reply

• After resetting your extender you need to follow these steps.
  1.CONNECT YOUR EXTENDER IN A DIRECT WALL SOCKET.
  2. PRESS WPS BUTTON ON YOUR EXTENDER FOR 3-5 SECONDS.
  3.PRESS WPS BUTTON ON YOUR ROUTER AND YOU WILL SEE LIGHTS STARTS BLINKING ON YOUR EXTENDER.
  4.IT WILL BE CONNECTED TO YOUR ROUTERS NETWORK ONCE THE LIGHT WILL BE SOLID.
  5.NOW ENTER THE ADDRESS FOR YOUR EXTENDER SET UP.
  6.LOGIN WITH DEFAULT CREDENTIALS THERE.
  7. IT WILL OPEN A SETUP WIZARD FOR YOU.
  8.FOLLOW THE STEPS OF WIZARD AND YOU ARE GOOD TO GO NOW.

  
  
  

  0

  
  
  

  Reply

• Please follow the steps below if your extender doesn’t work:
  > Hard Reset the extender and wait for the extender to boot up.
  > Connect your computer wireless to the extender
  > Pull up a browser and at the top on the address bar type in 192.168.206.1
  > You will be directed to the Belkin extender setup wizard.
  > Click on Start setup

  
  
  

  0

  
  
  

  Reply