0
bayeh
TP-LINK
0 Subscribers
Submit Answer
0 Answers
– If your password is not working then you need to reset your router.
– Look for the reset button on the back of your router.
– Press and hold it for 10-15 seconds.
– Release it and wait for 2 minutes.
– Before doing reset make sure only power is connected and no other cable.
If your router is not taking your password then you can use WPS setup to connect or reset the router.
///////////////////
WPS connect
– To connect your phone on the wifi by WPS got to SETTINGS > WIFI > ADVANCED SETUP > WPS connect.
– Now your phone is looking for a WPS connection so, press the WPS button on your router.
– Now your phone is connected to the WIFI.
– Go to your browser and open the router page to check what password did you set for your router.
/////////////////
RESET Router
– You can reset the router to factory default settings.
– Take a paperclip and push it into the reset hole of your router for 30 seconds.
– Now wait for 2 mins after that you can connect to your router using the default wifi password it came with.
If the password for your Tplink Router is not working kindly follow the instructions below:
> Press and hold the factory reset button for 30 seconds
> Wait for the router boot up
> Reconfigure the router manually
> add a new password
> save the settings and try to connect to the devices with the new password.
As you have mentioned that Your Tp link device is not taking password in this case kindly reset your device to factory default by using a paper clip and then re setup the device again with fresh settings.
For any help feel free to call us back on 1-800-603-4024.
In that case you need to reset your router by inserting the paper clip in reset hole on the back of your router for 15-20 seconds.
And make sure no other cable is connected on the back of it except the power cable .
Now set up your router again with all new settings .