My TP link is not recognising devices?

3 comments

• – Look for the reset button on the back of your router.
  – Press and hold it for 10-15 seconds.
  – Release it and wait for 2 minutes.
  – Before doing reset make sure only power is connected and no other cable.
  – Now plug an ethernet cable from modem to router WAN port.
  – Connect to your router hardwired from LAN port to PC.
  – Open your browser.
  – In the address bar type 192.168.0.1 and enter.
  – Login with admin credentials.
  – The setup wizard will run.
  – Follow the instruction and complete the setup.

  Reply

• If the password for your Tplink Router is not working kindly follow the instructions below:
  > Press and hold the factory reset button for 30 seconds
  > Wait for the router boot up
  > Reconfigure the router manually
  > add a new password
  > save the settings and try to connect to the devices with the new password.

  Reply

• As you have mentioned that your Tp link is not detecting device it means that wireless streaming is disable in settings. Kindly enable it and then your router will detect your devices.
  If problem still persists kindly hard reset your device and resetup it again.
  For any help feel free to call us back on 1-800-603-4024.

  Reply